Eva

05/04/16 - Today I was voted to be the blog leader and needed to setup the blog for the group.

05/06/16 - We worked on the "What is an ROV" page, where I researched and wrote about the different parts of a Remotely Operated Vehicle and what the parts do to help the machine function. The other members of my group worked on the other parts of the page and also the "Challenges" Page where they took pictures of the different obstacles and things our machine would need to do and wrote about the what we needed to do in order to pass said challenges.

05/10/16 - Today we discussed the parts of an ROV with Mrs. S, and then recieved our parts for our machine. We then watched videos for our jobs and I worked on taping up the motors and water proofing them.

05/11/16 - Today I finished taping up the motors and then proceeded to drill holes into the tops and bottoms of the camera film canisters. I then stripped the wires and threaded them through the tops of the film canisters so we could attach them to our motors.

05/13/16 - Today we had the wires attached to the motors and then we waterproofed them using wax and put them in the cannisters. we then started to put together the thrusters.

05/20/16 - Today I attached the net to the ROV, and we corrected the buoyancy of the ROV and tested it in the water.